Specification
Material: ABS
Color: White
Input Voltage: 100-240v, 50/60Hz, 0.15A
Output Voltage: 5v, 500mA
Size: (L) x (W) x (H) 200 x 60 x 55 mm / 8 x 2 x 2 inch (appr.)
Plug Type: China National Standard Plug (We will be based on your country to send the corresponding adapter plug)
WARM TIPS: If the local voltage is not in the range of 100v to 240v, please purchase it carefully, it may not be available
Features
● Accommodates 5 toothbrushes
● Can sterilize the toothbrush
● Can dry the toothbrush, use carbon fiber to heat and evaporate the water left on the toothbrush.
● Principle of sterilization and drying
● Sterilization adopts quartz ultraviolet light tube, which emits 254 band of ultraviolet rays to directly disinfect the toothbrush.
● Drying uses carbon fiber to heat and evaporate the water left on the toothbrush to dry the toothbrush, so as to achieve the purpose of antibacterial
Operation and working mode description
1. Plug the power cord into the jack on the product, and connect the other end to the power supply. Press the power button to start the automatic operation. The sterilization and drying functions work at the same time.After the germicidal lamp is turned off after 5 minutes, it will automatically sterilize every 4 hours, once for 5 minutes,uninterrupted cycle
2. Drying is continuous for 24 hours and will not turn off unless you press the power button or disconnect the power. If you turn it back on after turning it off, the sterilization timer will restart from the moment it is turned on
How to Install:
1. This product should be fixed on a cleaning, dry, ventilated and smoothly ceramic tile wall. There should be an electrical outlet nearby.
2. Cleaning the ceramic tile surface with a dishcloth before fixing the brush sterilizer.
3. Tear off the surface film of Adhesive
4. Stick to the wall and remove air
5. Attach toothbrush sterilizer to the no-trace sticker
6. Insert USB power cable.
Package included
1 X Toothbrush Sterilizer
1 X Sheef of Adhesive Sticker
1 X Power Cable
1 X USB Plug
